Something in the house stops working, and the cause is rarely obvious from where you are standing. A breaker that trips every time the dishwasher runs, an outlet that stopped responding, a light that flickers under load, or a panel that hums when the air conditioning kicks on. Those symptoms point somewhere, and finding where they point is the first part of the job. We handle electrical repairs, panel upgrades, wiring, and installations for homeowners and property managers across Town and Country, and the call is where we figure out what you are actually dealing with.
Town and Country is a town of well-established homes, many of them large, some of them older, and most of them carrying electrical systems that have been added to, updated in pieces, or stretched to carry loads they were not originally sized for. That context shapes what we see when we arrive. Whether you need a single circuit traced or a full service upgrade, we scope the job on the call and get it on the schedule.
Call (636) 695-9789 for a quote.
Electrical pricing is not a flat number pulled from a list, because the job is not a flat thing. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or the panel can carry the change are the three things that move a quote from one job to the next. A panel upgrade in a home where the service entrance is already in good shape is a different scope from one where the meter base and the weatherhead need attention too. A circuit added to a finished basement is a different run from one in a space with open framing.
When you call, we talk through what is happening and what the job is likely to involve. You get the rate on the phone before anything is scheduled. If the scope changes once we are on site because something unexpected turns up inside the wall or at the panel, that conversation happens before the work continues, not after. The price is confirmed before the work starts, and what it covers is explained up front.
A few things consistently shift the scope. The age of the wiring behind the walls matters, because older homes sometimes have aluminum branch wiring or insulation that has degraded, and a repair that looks simple from the outside turns into something larger once the box is open. The panel's current capacity matters when you are adding circuits or planning an appliance upgrade. The distance of the run matters for lighting and outlet circuits. None of those are surprises if we talk through the job before we arrive.
Panel work requires the main breaker off, which means the whole house goes dark for part of the job. That is unavoidable when the work is at the service entrance or involves replacing the panel itself. We plan around it. If you are working from home or running a business out of the property, we talk through the timing on the call so the outage window lands where it does the least damage to your day.
Most other jobs do not need a full shutdown. Replacing an outlet, running a new circuit, installing a ceiling fan, or adding GFCI protection to a kitchen or bathroom circuit means isolating one breaker while the rest of the house stays live. The work is contained, and the disruption is proportional to the scope.
Commercial spaces and rental properties have less tolerance for unplanned downtime than a private home does. We account for that when we schedule. If the job is in a space that cannot go dark during business hours, we talk through what is possible and plan the work accordingly. The same applies to a multi-unit property where one tenant's circuit runs through a panel that serves others. The scope and the plan are settled before anyone arrives.
Some faults present clearly. A dead outlet, a tripped breaker with a visible cause, a fixture that stopped working after a bulb change. Those are straightforward to trace. Others are not. A breaker that trips intermittently, a circuit that fails under load but holds fine at rest, a fault that only shows up in wet weather, a flicker that comes and goes without pattern. These are the jobs where the diagnostic is its own work, separate from the repair.
Intermittent faults are harder to catch because the problem is not always present when you are looking for it. A loose connection inside a junction box that only fails when the circuit heats up under load, a ground fault that only appears when moisture reaches a buried splice, a breaker that is borderline and trips on a warm day but holds on a cool one. Finding those requires working through the circuit methodically rather than going straight to the most likely answer. We trace them to the source before we propose a fix, because a repair that addresses the symptom and not the cause does not stay repaired. The range of work covered is explained on our page of electrical services.
A detached garage or a workshop that has grown beyond a single outlet and a light calls for its own subpanel rather than a long run of extension cords or a circuit that was never sized for the load. A subpanel fed from the main panel gives the space its own breakers, its own capacity, and the ability to run power tools, lighting, and charging equipment without tripping a breaker back in the house. The run from the main panel to the subpanel is sized for the load the space needs, and the subpanel itself is grounded and bonded independently. Decisions about the work get made while you are on the phone, so the scope is clear before anyone shows up.
A well pump draws a significant starting load and needs a dedicated circuit sized to handle it. An undersized circuit or a shared breaker creates nuisance trips and, over time, puts stress on the pump motor. Irrigation systems have their own wiring requirements, particularly where the control wiring meets the power supply. We handle both the circuit and the connection at the panel, and we confirm the load calculation before pulling wire.
A stairwell, a hallway, a large room with entries at both ends, any space where you want to control a light from more than one location needs three-way or multi-way switching wired correctly. It is a job that looks simple and goes wrong in ways that are annoying to trace after the fact. We wire it from the switch legs back to the fixture and confirm it operates correctly from every location before we leave.
This is its own category of work, not a subset of repair. An intermittent trip or a fault that appears and disappears is diagnosed differently from a hard failure. We work through the circuit systematically, test under load where that is what it takes to reproduce the fault, and check the panel and the wiring both. Arc-fault and ground-fault breakers add a layer of protection and can also identify where a fault is occurring by the way they trip. AFCI and GFCI protection are part of what we check during any diagnostic visit where the symptom is ambiguous.
Older homes in St. Louis County often have wiring that has been extended, modified, or repaired over the years without a full record of what was done. That history can produce faults that do not trace to any obvious location. We work through it methodically rather than guessing.
A job that cannot wait does not fit neatly into a standard booking window. A panel that is throwing sparks, an outlet that smells of burning, a circuit that has gone dead in a room that cannot be closed off. We take short-notice calls and answer them the same way we answer any other. We are available every day from 6:30 AM to 8:30 PM. If your situation is urgent, say so on the call and we will tell you what the schedule allows.
For planned work, we keep booking flexible. Tenants with limited availability, property managers coordinating access across multiple units, homeowners who need the work done around a work-from-home schedule. The booking conversation covers all of that. You get a call before the visit to confirm the scope and the timing, and the price is settled before we schedule.
Safe wiring. Solid workmanship. Straight answers.
We cover Town and Country and the surrounding area throughout St. Louis County. Neighboring communities we serve include Country Life Acres, Crystal Lake Park, Westwood, Des Peres, and Creve Coeur. If you are in any of these areas and need electrical work handled, the call is the same process regardless of which town you are in. You describe the problem, we scope the job, and the rate is confirmed before anything is scheduled.
Children should be kept out of the immediate work area. Depending on the scope of the job, particularly panel work or a rewire, it may be worth having children out of the affected sections of the home entirely. We let you know what to plan for on the call.
Call us at (636) 695-9789 and describe what is happening.
We want to know if something we worked on is not performing correctly, and we will work out what the next step is.
Yes. We serve Town and Country and the surrounding communities throughout St. Louis County, including Des Peres, Creve Coeur, Country Life Acres, Crystal Lake Park, and Westwood. The process is the same for every location: call, describe the situation, get the scope and the rate confirmed on the phone, and schedule from there.
Multiple rounds of work by different people over time often means inconsistent wiring methods, mislabeled breakers, and circuits that do not match what is documented. We trace the circuits as part of any diagnostic or inspection and give you a clear picture of what is actually there.
A burning smell near an outlet is treated as urgent. It can indicate a wiring fault, an overloaded connection, or a failing device, any of which can lead to a fire if left unaddressed.
Stop using that outlet and call us at (636) 695-9789 right away.
Larger homes carry more circuits, more panel load, and often more wiring history, especially where additions or renovations have been done over time. Older homes in the area sometimes have panels that were sized for a smaller electrical footprint than the house now demands, and branch wiring that has been extended without a full record of what was changed. We assess what is actually there on the visit and explain what it means for the job before any work begins.
It means an inspector identified something that warrants a closer look by an electrician. The flag could point to anything from a missing cover plate to a panel that needs replacing. We assess what the inspector noted and give you a specific answer about what is involved.
Call (636) 695-9789 and tell us what is happening.
We scope the job on the call, explain what the work involves, and give you the rate before anything is booked. That is true whether the job is a single outlet or a full panel upgrade. You will not be handed a number after the work is done that does not match what was discussed beforehand. The price is agreed before we start.
Call (636) 695-9789. We are available every day from 6:30 AM to 8:30 PM.
Electrical service reaches these neighboring areas too: Ellisville, Overland, Bridgeton. The rest are on our complete service area.
Electrical work covers a wide range of jobs, and knowing what each one involves helps you call with confidence. Below is a plain-language look at the services we handle for homeowners, landlords, and property managers in Town and Country and across St. Louis County. Each row covers what the service includes, who it fits best, and a practical note worth knowing before you call.
| Electrical Service | Scope of Work | Common Situations | Worth Knowing |
|---|---|---|---|
| Electrical Repairs & Troubleshooting | Dead outlets and switches, Flickering or dimming lights, Burning smells and sparking, Arc-fault and ground-fault checks | Any homeowner or property manager dealing with an active electrical symptom | We trace the fault to its source before any work is proposed, so you know what is wrong and why before anything is replaced. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgrades, Fuse box replacement, Subpanel addition, Service entrance and meter work | Homes adding an EV charger, major appliance, or finishing a basement with an older or undersized panel | We run a load calculation first and explain what the panel can and cannot carry before any upgrade is scheduled. |
| Ceiling Fan Installation | Ceiling box support installation, Switch leg wiring, Fan and light kit hookup, Replacement of existing fans | Any room where a fan is being added for the first time or an older unit is being replaced | A fan needs a rated ceiling box, not a standard light box. We confirm the box before the fan goes up. |
Call (636) 695-9789 to talk through what you are seeing and get a quote before anything is scheduled.
(636) 695-9789