Ellisville homeowners and property managers call us when something in the electrical system stops working the way it should, and they want to know what it will cost before anyone shows up. We handle the full range of residential electrical work: repairs, panel replacements, wiring, circuit additions, ceiling fans, outdoor lighting, EV charger hookups, and backup generator wiring. The price is agreed on the call before the work is scheduled, and the scope is explained before anyone arrives.
Call (636) 695-9789 to get started.
We service this area, and its neighborhoods each have their own wiring. A town this size carries a real mix of housing ages, from post-war ranches on original wiring to newer construction with modern panels and demands that older systems were never built to handle. That variety shapes the work we take on here, and we come prepared for what we find rather than assuming every house looks the same.
Electrical problems at a commercial property carry a different kind of pressure than a residential call. A retail space or office that goes dark loses revenue by the hour. We plan commercial work around that reality, which sometimes means scheduling after closing, keeping part of the building energized while circuits on another section are worked, or phasing the job so operations can continue without a full shutdown.
Light industrial premises often involve panel capacity questions that go beyond a straightforward breaker count. Adding equipment, expanding a production area, or bringing in machinery with a heavy continuous draw all start with a load calculation. We work through that on the call and explain what the existing service can carry before any wire is pulled.
Property managers in Ellisville deal with the same electrical issues across multiple units, and the coordination matters as much as the repair itself. We handle outlet and circuit work in occupied units, panel work in common areas, and code corrections that come up during a sale or a re-lease. The scope is confirmed before the visit.
Electrical problems don't wait, and neither do we, so when something needs attention before it becomes a larger issue, the call is where it starts. We take short-notice calls for problems that will not keep, and we work around the schedules of businesses and tenants that have to stay operational. You do not need to choose between getting the problem fixed and keeping the lights on for a tenant.
For planned work, booking is flexible. We confirm what is available when you call and find a time that fits the situation. The hours run every day from 6:30 AM to 8:30 PM, which covers early-morning calls before a workday starts and evening appointments after a tenant is home.
The rate for a job is discussed on the call, before anything is scheduled. What moves a quote is what the job actually requires once the fault is traced: what has to be opened up to reach it, whether the existing panel or circuit can carry the change being asked of it, and what the wiring behind the wall turns out to be. A simple outlet swap and a circuit addition that requires a panel evaluation are two different conversations, and we have both of them plainly before the work starts.
You get a plain answer on repair versus upgrade. If the panel cannot carry the added load, that comes up on the call, not after the circuit is already pulled. Ask what it covers and you get a straight answer. The price is confirmed before we schedule, and the scope does not shift after the visit begins without a conversation first. The range of work covered is explained on the page covering our electrical services.
The moment that matters most on a renovation or an addition is before the drywall goes up. Electrical rough-in has to happen after framing is complete and before insulation and board go in. If the electrician is scheduled too late, the work either gets delayed or the walls come back down. We coordinate with the other trades on the job and confirm what we need in place before we arrive, so the rough-in does not hold up the rest of the build.
Renovations have a way of uncovering wiring that was not on the original plan. Opening a wall for a kitchen remodel sometimes reveals aluminum branch wiring, undersized circuits, or junction boxes that were buried without being properly covered. When that happens, the scope changes and the options are explained before the work continues. Catching it during a remodel is the right time, because the wall is already open.
A plug-in detector and a hardwired alarm are not the same thing. Hardwired smoke and carbon monoxide alarms are interconnected across the home, so when one detects a problem, every alarm in the house responds. We install and replace hardwired units, handle the wiring to the existing circuit, and confirm the interconnect is working before we leave.
A panel that trips under normal loads, runs warm, or carries breakers that can no longer be sourced is a panel worth replacing rather than patching. Breaker replacement addresses a single failing component. Full panel replacement addresses the whole assembly, including the bus bars, the service entrance connection, and the grounding. We assess which the situation calls for and explain the difference on the call.
Homes built during certain decades in this region were wired with aluminum branch wiring that was standard at the time. Aluminum behaves differently from copper at connections, and the risk is at the termination points, where the wire meets an outlet, a switch, or a breaker. Remediation involves either replacing the branch wiring with copper or installing approved connectors at every termination point. We assess the extent of the aluminum wiring and explain the options before any work is proposed.
A 100-amp service that was adequate for a home in its original configuration often cannot carry an EV charger, a modern kitchen load, and a finished basement at the same time. A service upgrade to 200 amps involves the meter, the service entrance, and the panel itself. We work through the load calculation on the call and confirm what the upgrade involves before anything is scheduled.
Grounding and bonding problems rarely announce themselves until something goes wrong. A home with improper grounding may not trip a breaker when a fault occurs, which is the opposite of what the system is designed to do. We check grounding and bonding as part of any panel work and as a standalone inspection item, and we explain what a correction involves before it is done.
Ceiling fan installation is straightforward when a wiring run and a properly rated box are already in place. When they are not, the job involves running a switch leg and installing a box rated for fan weight. We handle both situations. Replacement of an existing fan is usually a single visit. A new installation in a room with no existing wiring takes a bit more planning, and we confirm the scope on the call.
We cover Ellisville and the surrounding communities in St. Louis County, including Ballwin, Clarkson Valley, Winchester, Wildwood, and Manchester. If your property is in any of these areas, the call works the same way: describe what is happening, get the scope and the rate on the phone, and schedule the visit. Coverage does not change based on which town the property is in.
Mixed wiring is common in homes that have been added onto or partially updated over the years. A panel upgrade or a new circuit addition starts with a look at what is feeding into the panel and what the new circuit will connect to. If the branch wiring on an existing circuit is undersized or aluminum, that gets flagged as part of the assessment rather than discovered after the new work is already done. The scope is confirmed on the call so you know what the visit covers before anyone arrives.
Full replacement with copper wiring is one path, but it is not always the only one. An approved remediation approach involves installing listed connectors at every termination point where the aluminum wire meets an outlet, switch, or breaker. Which approach makes sense depends on the extent of the aluminum wiring, how accessible the runs are, and what the inspection turns up. We assess the situation and explain both options before any work is proposed.
That depends on the nature of the work. Interior electrical jobs generally require someone present to confirm the scope and sign off when the work is done. Call us and we can talk through what the specific job requires.
Yes, in situations where opening a wall is not practical, surface raceway is a code-compliant way to run wiring along the surface. We assess whether it is appropriate for the location and explain the appearance and the trade-offs before doing it.
We work around the service schedule. The job is scoped on the call, and we plan which circuits need to come down and when so the kitchen can keep running as much as possible. Panel work that requires a full shutdown is scheduled outside service hours.
If conditions behind the wall or at the panel change what the job requires, we stop and explain before going further. You get a revised scope and a revised price before any additional work is done.
Vacant properties can be scheduled with whoever holds the keys or manages the property. We confirm the access arrangement on the call and work out what is needed to get in, complete the job, and secure the property when we leave.
Breakers that hold. Outlets that work. Lights that stay on.
An electrical problem that has been sitting for a few weeks does not get smaller on its own. A tripping breaker, a warm outlet, aluminum wiring that has never been assessed, or a panel that is running out of room are all things that are easier and less expensive to deal with before they become urgent.
Call Lake Saint Louis Electrical Company at (636) 695-9789, every day from 6:30 AM to 8:30 PM, and get the scope and the rate before anything is scheduled.
The problem is already there. The call is what moves it forward.
Also serving the towns around: Town and Country, Eureka, Weldon Spring, Cottleville, Dardenne Prairie. View our complete service area.
Electrical work covers a wide range of jobs, and knowing what each one involves helps you call with confidence. Below is a plain-language look at the services we handle for homeowners, landlords, and property managers in Ellisville and across St. Louis County. Each row covers what the service includes, who it fits best, and a practical note worth knowing before you call.
| Electrical Service | Scope of Work | Common Situations | Worth Knowing |
|---|---|---|---|
| Electrical Repairs & Troubleshooting | Dead outlets and switches, Flickering or dimming lights, Burning smells and sparking, Arc-fault and ground-fault checks | Any homeowner or property manager dealing with an active electrical symptom | We trace the fault to its source before any work is proposed, so you know what is wrong and why before anything is replaced. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgrades, Fuse box replacement, Subpanel addition, Service entrance and meter work | Homes adding an EV charger, major appliance, or finishing a basement with an older or undersized panel | We run a load calculation first and explain what the panel can and cannot carry before any upgrade is scheduled. |
| Outlet & Switch Installation | GFCI outlet installation, AFCI outlet installation, Dimmer and smart switch wiring, Three-way switch configuration | Homeowners adding outlets, replacing worn receptacles, or upgrading to code-required protection | GFCI protection is required in kitchens, bathrooms, garages, and outdoor locations. We confirm what applies during the visit. |
Call (636) 695-9789 to talk through what you are seeing and get a quote before anything is scheduled.
(636) 695-9789